PP Fittings (Akasiyana-siyana Matsanangudzo Anowanikwa)

1. Zita remakemikari: Polypropylene (PP). Hunhu: Low density, high simba uye rigidity. Kuomarara uye kupikisa kupisa kwakakwira kune yakaderera-density polyethylene (LDPE). Inogona kushandiswa pane tembiricha inosvika 100 ° C.
2. Yakanaka ma mechanical properties - kunze kwekukanganisa kupikisa, mamwe ma mechanical properties ari nani pane ayo e polyethylene. Excellent processability.
3. Kupisa kukuru kwekudzivirira - kuenderera mberi kwekushanda kwekushisa kusvika ku100 ° C.
4. Yakanakisa high-frequency insulation properties, inenge isiri-hygroscopic, uye isina-reactive nemishonga yakawanda.
5. Kuchena kwepamusoro, kusina chepfu.
6. Yakanaka voltage kuramba uye arc kuramba.

(Yakazara huwandu hwezvakatemwa, customization iripo)

1. Straight Fittings:
   • Yakatwasuka 1/8″ - Φ6 (shinda 1/8″, chubhu OD Φ6 mm)
   • Yakatwasuka 1/8″ - Φ8 (shinda 1/8″, chubhu OD Φ8 mm)
   • Yakatwasuka 1/4″ - Φ6 (shinda 1/4″, chubhu OD Φ6 mm)
   • Yakatwasuka 1/4″ - Φ8 (shinda 1/4″, chubhu OD Φ8 mm)
   • Yakatwasuka 3/8″ - Φ6 (shinda 3/8″, chubhu OD Φ6 mm)
   • Yakatwasuka 3/8″ - Φ8 (shinda 3/8″, chubhu OD Φ8 mm)
   • Yakatwasuka 1/2″ - Φ8 (shinda 1/2″, chubhu OD Φ8 mm)
2. Elbow Fittings:
   • Gokora 1/4″ - Φ6 (shinda 1/4″, chubhu OD Φ6 mm)
   • Gokora 1/8″ - Φ6 (shinda 1/8″, chubhu OD Φ6 mm)
   • Gokora 1/4″ - Φ8 (shinda 1/4″, chubhu OD Φ8 mm)
3. Tee Fittings:
   • Tee Φ6 – Φ6 – Φ6 (chubhu OD Φ6 mm)
   • Tee Φ8 – Φ8 – Φ8 (chubhu OD Φ8 mm)
   • Tee Φ6 – Φ6 – Φ6 (chubhu OD Φ6 – Φ3 mm)
4. Bulkhead Fittings:
   • Bulkhead Φ6 – Φ6 (chubhu OD Φ6 mm)
   • Bulkhead Φ8 – Φ8 (chubhu OD Φ8 mm)
   • Bulkhead Φ8 – Φ6 (chubhu OD Φ8 – Φ6 mm)
5. Double Elbow Fittings:
   • Gokora kaviri Φ6 – Φ6 (chubhu OD Φ6 mm)
   • Gokora kaviri Φ8 – Φ8 (chubhu OD Φ8 mm)
6. Zvimwe Zvishongedzo:
   • Yakatwasuka 1/8″ - Φ3 (shinda 1/8″, chubhu OD Φ3 mm)
   • Kaviri yakatwasuka Φ6 – Φ6 (chubhu OD Φ6 mm)
   • Yakapetwa kaviri yakatwasuka Φ6 – Φ3 (chubhu OD Φ6 – Φ3 mm)
   • Yakatwasuka 1/4″ - Φ10 (shinda 1/4″, chubhu OD 10 mm)
   • Yakatwasuka 1/4″ - Φ3 (shinda 1/4″, chubhu OD 3 mm)
   • Kaviri yakatwasuka Φ3 - Φ3 (chubhu OD 3 mm)
   • Kuderedza tee Φ8×5 - Φ6×4 - Φ8×5